Diesel Grinders For Sale

Super clean little tub grinder with factory gooseneck hitch. Swing hammers. NO magnet or remote. Good tires.  Side tilt tub makes it really easy to service the drive line, hydraulics and mill. 40 swinging hammers. Wide open screen. Oil pressure is good but we wired around a new Murphy switch so it runs. Something else … Continue reading “2001 Duratech HD8 V”

Good running MC266. We’ve had it several years. Bottom end of engine redone within last 400 hours. Newer mill, mill bearings and infeed bed.  Magnet. Remote. Reversing fan. (Crossbelt magnet is available but NOT included.) Wire harness was updated. Originally plumbed for color pump but the infrastructure is no longer there. It could be put … Continue reading “2008 Rotochopper MC266”

Second owner. We’re pretty sure there are several hours of “not under load” run time from the previous owner. They would start it in the morning and load a little throughout the day.  Owned it for about four years. The lower bearings were done a while back in the engine because we had a leak … Continue reading “2017 Rotochopper MC266”

Process big stumps, C&D, railroad ties,  miscellaneous chunk wood and brush easily.  Can handle some longer lengths of material. Good for contaminated materials.  Very efficient grinder/shredder. New style disc with bolt on blades. (We call the “teeth” blades but they are not sharp like a knife.) Includes remote control and magnet. Posi-traction pan drive system … Continue reading “2000 Universal Refiner PDR 80”

Runs good, starts easy. Strong motor. Set up for wood with Carbide teeth. Very durable grinder. Just rebuilt the apron cylinders and some lines. Has corded remote operation so you can stand 30 feet away from it to operate it. All functions work. We put several new tires on it and pulled it 250 miles … Continue reading “Rexworks 425”

Solid runner. We just have more material to handle than we want to run through this rubber tired horizontal grinder. PT Tech clutch, new remote, reversing fan and magnetic head pulley. Engine was replaced some time prior to 2021 (has a reman tag on it). Minimum of 700 hours on engine but we have no … Continue reading “2006 Peterson Pacific 6700B”

Would trade for a track Peterson, including a little bit of a project. Upgraded panel and remote control. Newer mill bearing on the clutch side. Magnet and Reversing Fan.  Runs good. Come and check it out. Roadworthy. We move it often. Contact us for a short video.

Model year is estimated. Packer 750 shredder. Hopper dimensions: 6′ long by approximately 24″ square. Load the hopper, close the door and a ram forces the material into the mill. Discharge conveyor is set up to carry finished product out over the tongue of the shredder so you can load over the tailgate of a truck. … Continue reading “1997 Packer 750”

Owned it for more than 10 years. Engine rebuilt around 400 hours ago. Unsure of total frame hours. New clutch. Governor works as it should.  24 heavy swing hammers with shock spacers. 4-5 screens included. Videos available. Tires are decent but brakes probably don’t work. No magnet.

Needs an infeed chain and probably sprockets. Needs stacker belt. Extra mill and feed wheel available.  Otherwise, runs good. We have bigger grinders available and we don’t need to put any money into this one.